8
STEP 4 – REGENERATION HOUR: The manufacturer has factory set 2:00 A.M. as the default. This
is the hour of day for regeneration and can be reset by using + or — buttons. “AM/PM”
toggles after 12. The default time is 2:00 a.m. (recommended for a normal household).
Press
NEXT to go to step 5. Press REGEN if you need to return to the previous step.
STEP 5 – REGENERATION MINUTES: Set the minutes using + or — buttons. Press
NEXT to exit
installer programming. Press
REGEN if you need to return to the previous step. To initiate
an immediate manual regeneration, press and hold the
REGEN button for three seconds.
The system will begin to regenerate immediately. The control may be manually stepped
through the regeneration cycles by pressing
REGEN.
2. Programming cont’d:
4 5
GENERAL OPERATION DISPLAYS
REGENERATION
MODE
OPERATING DISPLAYS AND INSTRUCTIONS:
1. GENERAL OPERATION: When the system is operating,
one of three displays may be shown. Pressing NEXT will
alternate between the displays. One of the displays is always
the current time of day. The second display shows the current
treated water flow rate through the system in Gallons Per
Minute. The third display is one of the following: days
remaining or volume remaining. Days remaining is the
number of days left before the system goes through a
regeneration cycle. Capacity remaining is the gallons that
will be treated before the system goes through a regeneration
cycle. The user can scroll between the displays as desired.
If the system has called for a regeneration that will occur
at the preset time of regeneration, the words “REGEN
TODAY” will appear on the display.
If a water meter is installed, the word “Softening” or “Filtering” flashes on the
display when water is being treated (i.e. water is flowing through the system).
2. REGENERATION MODE: Typically a system is set to regenerate at
a time of no water use. If there is a demand for water when the
system is regenerating, untreated water will be delivered. When the
system begins to regenerate, the display will change to include
information about the step of the regeneration process and the time
remaining for that step to be completed. The system runs through the
steps automatically and will reset itself to provide treated water when
the regeneration has been completed.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals