Water Right Impression Series Troubleshooting Guide download pdf (Page 8)

STEP 4 – REGENERATION HOUR: The manufacturer has factory

set 2:00 A.M. as the default. This is the hour of day for

regeneration and can be reset by using + or — buttons.

“AM/PM” toggles after 12. The default time is 2:00 a.m.

(recommended for a normal household). Press next to go to

step 5. Press regen if you need to return to the previous step.

STEP 5 – REGENERATION MINUTES: Set the minutes using + or —

buttons. Press next to go to step 6. Press regen to return to

previous step. To initiate an immediate manual regeneration,

press and hold the regen button for three seconds. The

system will begin to regenerate immediately. The control

may be manually stepped through the regeneration cycles by

pressing regen.

STEP 6 – ALARM BUZZER: The manufacturer has factory set

“ON” as the default. Alarm will sound immediately after

regeneration if there is no salt or if another error has occurred.

Turn the alarm “OFF” or “ON” using + or — buttons. Press

next to exit installer programming.

STEP 7 – DISPLAY BACKLIGHT: The manufacturer has factory set

“ON” as the default. Turn the light “OFF” or “ON” using +

or — buttons. “OFF” will turn display backlight off after five

minutes of keypad inactivity.

Press next to exit installer programming.

REGEN TIME HOUR

SET

2:00

REGEN TIME MINUTES

SET

2:00

LIGHT NORMALLY

SET

ALARM BUZZER

SET

DAYS BETWEEN REGEN

SET

WATER HARDNESS

SET

1 2 3

OPERATING DISPLAYS AND INSTRUCTIONS:

TIME OF DAY MON

GPM

2:408

FLOW RATE

GPM

8.0

The user can scroll

between the displays

as desired.

1. GENERAL OPERATION: When the system is operating, one of four displays may be shown.

Pressing next will alternate between the displays.

1. CURRENT TIME OF DAY and GPM

2. FLOW RATE which is the current treated water flow rate through the system in Gallons Per Minute

3. CAPACITY REMAINING which is the gallons that will be treated before the system signals a

regeneration cycle

4. DAYS TO A REGEN is the number of days left before the system goes through a regeneration

cycle, based on the days override value

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Comments to this Manuals

No comments

Water Right Impression Series Troubleshooting Guide Page 8

Comments to this Manuals

Related products and manuals for Water dispensers Water Right Impression Series