Water Right Impression Series Troubleshooting Guide download pdf (Page 24)

1900 Prospect Court • Appleton, WI 54914

Phone: 920-739-9401 • Fax: 920-739-9406

MANUAL REGENERATION

NOTE: If you need

to initiate a manual

regeneration, either

immediately, or the

same night at the

preprogrammed time for regeneration

(typically 12:00 AM), complete the

following steps.

For Immediate Regeneration:

Press and hold

REGEN until valve motor starts (typically 3 seconds).

For Regeneration the same night:

Press and release

REGEN (notice that flashing “REGEN TODAY” appears).

ERROR

If the display toggles between “Error”

and an error code (i.e. a number),

call a service technician and report

the error code.

BYPASS VALVE OPERATION

To shut off water to the system, position arrow handles as shown in

the bypass operation diagram below. If your valve doesn’t look like

the diagram below, contact your service technician for instructions

on how to shut off water.

NORMAL OPERATION BYPASS OPERATION

ADJUST HARDNESS, DAYS BETWEEN REGENERATION,

OR TIME OF REGENERATION

QUICK REFERENCE GUIDE:

GENERAL OPERATION

When the system is operating,

one of three displays will be

shown: time of day, gallons of

treated water available,

or gallons per minute.

Pressing

NEXT will

toggle between the

three choices.

TO SET TIME OF DAY

In the event of a

prolonged power

outage, time of day

flashes, indicating

that this needs to be

reset. All other

information will be

stored in memory no

matter how long the

power outage. Please

complete the steps

as shown to the right.

To access this mode,

press

SET CLOCK.

1. Accessed by

pressing

SET CLOCK

2. Adjust hours with

+ and — buttons,

AM/PM toggles

at 12.

3. Press

4. Adjust minutes with

+ and — buttons.

5. Press NEXT to

complete and

return to normal

operation.

For initial setup or to make

adjustments, please complete the

steps as shown to the right.

1. Access by pressing

NEXT and +

button simultaneously.

2. Hardness display shows “-nA-”

when used as a filter.

3. Press

4. Adjust days between regenerations

using + and — buttons.

5. Press

6. Adjust time of regeneration hour

with + and — buttons, AM/PM

toggles at 12.

7. Press NEXT

8. Adjust time of regeneration minutes

with + and — buttons.

9. Press

NEXT to complete and return

to normal operation.

LIT-IMF/IMPF Man ROPU 06/11 2M

1 2 ... 19 20 21 22 23 24

Comments to this Manuals

No comments

Water Right Impression Series Troubleshooting Guide Page 24

Comments to this Manuals

Related products and manuals for Water dispensers Water Right Impression Series